Product ID:97-640, 97-98 (1215931)
MSDS Date:05/04/1995
FSC:8010
NIIN:00N065465
Kit Part:Y
MSDS Number: CBCZD

PPG INDUSTRIES INC

4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555

Cage: DO542

PPG INDUSTRIES INC. COATINGS & RESINS GP

9 ALLISON PARK, PA 15101

Telephone: 412-492-5555

Cage: DO542

2-PROPANOL, 1-METHOXY-; (PROPYLENE GLYCOL MONOMETHYL ETHER)

CAS: 107-98-2

RTECS: UB7700000

Fraction By Weight: 10-15%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150STEL

XYLENE

CAS: 1330-20-7

RTECS: ZE2100000

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ETHANOL, 2-PROPOXY-; (ETHYLENE GLYCOL MONOPROPYL ETHER)

CAS: 2807-30-9

RTECS: KM2800000

Fraction By Weight: 5-10%

OSHA PEL N/K

ACGIH TLV: N/K

TOLUENE (SARA 313) (CERCLA)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 5-10%

OSHA PEL 200 PPM

ACGIH TLV: S, 50 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

FILM,FORMERS, RESINS, & ADDITIVES

Fraction By Weight: 45-50%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL/FATAL. EYE:CAUSES SEV
IRRIT. SYMPS:EYE WATERING, HDCHS, NAUS, DIZZ & LOSS OF COORD ARE
INDICATIONS THAT SOLV LEVELS ARE TOO HIGH. REDNESS, ITCHING,
BURNING SENSATION & VISUAL DISTURBS M AY INDICATE EXCESSIVE CONT.
SKIN:MAY CAUSE MOD IRRIT. MAY BE ABSORBED. SYMPS:DRYNESS, ITCHING,
BURNING, REDNESS & SWELLING ARE CNDTNS ASSOC W/EXCESSIVE CONT.
INHAL:VAP & SPRAY MIST MAY BE HARMFUL. VAP IRRITS EYES, NOSE &
THROAT. RPTD EXPOS TO HIGH VAP CONCS MAY CAUSE IRRIT OF RESP SYS &
PERM BRAIN & NERV SYS DMG. INTENTIONAL MISUSEBY DELIB CONC & INHAL
CONTENTS CAN BE HARMFUL/FATAL. CHRONIC:TOLUEN E (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZS: APPEARS ON NAVY LISTING OF OCCUP
CHEM REPRO HAZS. SEEK CONSULTATION FROM APPROP HLTH PROFESSIONALS
CONCERNING LATEST HAZ LIST INFO & SAFE HNDLG & EXPOS INFO . AVOID
LONG TERM RPTD CON T. THIS PROD CNTNS ING 3 WHICH HAS BEEN SHOWN TO
CAUSE ADVERSE EFTS ON KIDNEYS, LIVER BLOOD &/OR BLOOD FORMING
TISSUE.

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF WATER
FOR @ LST 15 MIN. SKIN:FLUSH IMMED W/PLENTY OF WATER FOLLOWED BY
WATERLESS HAND CLEANER & SOAP & WATER IF MATL APPEARS TO ADHERE TO
SKIN. INHAL:REMOVE TO FRESH AIR. APPLY ARTF RESP & OTHER
SUPPORTIVE MEASURES AS REQ. OTHER:IF INGEST, ANY TYPE OF
OVEREXP/SYMPS OF OVEREXP OCCURS DURING/FOLLOWING USE OF PROD, CONT
POIS CTL CTR, EMERGENCY R OOM OR PHYSICIAN IMMEDIATELY; HAVE
MATERIAL SAFETY DATA SHEET INFORMATION AVAILABLE.

Flash Point Method:PMCC
Flash Point:57.0F,13.9C
Lower Limits:1.3%
Extinguishing Media:USE NATL FIRE PROT ASSOC (NFPA) CLASS B EXTINGS
(CARBON DIOXIDE, DRY CHEM/UNIVERSAL AQUEOUS FILM FORMING FOAM)
DESIGNED TO EXTING NFPA CLASS IIIB LIQ FIRES.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & POSS AUTOIGNIT/EXPLO WHEN EXPOSED
TO EXTREME HEA T. IF WATER IS USED, FOG NOZZS ARE PREF.
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPKS, & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY ON HOT SURFS. TOX GASES MAY
FROM WHEN PROD IS CONT BY F LAME/HOT SURFS.

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH/MSHA APPRVD RESP, SKIN & EYE PROT SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE/OTHER NONCOM BUST ABSORB MATL & PLACE INTO CLEAN, EMPTY
CONTAINERS FOR DISPOSAL. ONLY SPILLED THE MATERIAL AND THE
ABSORBENT SHOULD BE PLACED IN THIS CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS IB FLAM LIQ.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT SYS, READ
MSDS(S) FOR OTHER COMPONENT/COMPONENTS BEFORE BLENDING AS RSLTING
MIX MAY HAVE HAZS OF ALL ITS PARTS. CNTNRS SHOULD BE GROUNDED WHEN
POURING. AVOID FREE FALL OF LIQS IN EXCESS OF FEW INCHES.

Respiratory Protection:OVEREXP TO VAPS MAY BE PVNTED BY ENSURING VENT
CTLS, VAP EXHST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C-) AIR
PURIFYING/AIR SUPPLIED (TC-19C-) RESPS MAY ALSO REDUCE EXPOS. READ
RESP MFR'S INSTRUCTIO NS & LITERATURE CAREFULLY TO DETERM TYPE OF
AIRBORNE CONTAMS AGAINST WHICH RESP IS EFFECTIVE AND HOW IT IS TO
BE PROPERLY FITTED.
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMS, LEL IN
INGREDIENTS BELOW THE STATED LIMIT,(SUP DAT)
Protective Gloves:NITRILE/NEOPRENE RUBBER.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
WEAR PROT CLTHG, INCLUDING IMPERMEABLE APRON CONSTRUCTED OF NITRILE
RUBBER OR NEOPRENE RUBBER.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
VENT: AND TO REMOVE DECOMPOSITION PRODUCTS DURING WELDING OR FLAME
CUTTING.

Boiling Pt:B.P. Text:230F,110C
Vapor Pres:8.3
Vapor Density:HVR/AIR
Spec Gravity:1.01
Evaporation Rate & Reference:89 (BUAC=100)
Solubility in Water:18.0%
Appearance and Odor:VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF
SOLVENTS LISTED IN INGS.
Percent Volatiles by Volume:59.65

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:AVOID CONTACT WITH STRONG ALKALIES, STRONG
MINERAL ACIDS, OR STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING/FLAME CUTTING MAY PRDCE FUMES
INCLUDING:CARBON MONOXIDE.

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WAS TE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.